The Log Book
Tales of an Artist Afloat
Mounting a watercolour painting onto wood solves two problems- the high cost of framing and the fact that glass can feel like it gets between the viewer and the image. Wooden cradles are much cheaper than mats and picture frames, and allow the viewer an unrestricted view of the art, without reflections obstructing their enjoyment. An added benefit is the fact that 2" thick cradles can also stand by themselves, making them ideal in small homes where wall space is limited, or in rental properties where hanging art is discouraged. A small cradle stands nicely on a shelf or desk and takes up less space than a frame. This tutorial will show you how to mount a painting onto wood so that the art can stand the test of time.
You might want to practice the process with unpainted paper first (if you miss the step of varnishing it, then you can still paint on the paper after it's mounted and seal it at the end). The process is not reversible, so you can't change your mind after a piece has been mounted! I first learned about this process from Karen Smith, and thought I'd share my experiences!
You wil need:
wooden cradle watercolour paper/ painting (a little larger than the cradle) spray varnish (I use Krylon UV archival matte varnish) gel medium (I use Liquitex Professional Matte Gel) brayer (a roller- you can also use the back of a tablespoon) craft knife cutting mat cold wax for extra protection (such as Jacquard Dorlan's cold wax or Gamblin cold wax) ​soft cloths for wax application and buffing
To protect the watercolour from light and dust, I seal it with four or five layers of Krylon UV archival matte varnish. The UV element is important as this will stop the painting from fading if exposed to light. Golden also make an excellent archival varnish, but it is more expensive and requires a longer drying time before recoating. A UV archival semi-gloss or gloss varnish is another option. It will intensify the colours of the painting and give a sheen slightly reminiscent of the wet paint.
To stick the watercolour paper onto the cradle, I use an acrylic gel medium such as Liquitex Professional Matte Gel. This acts as a strong adhesive when dry. It's preferable to regular glues as it is acid-free so will not yellow your paper over time. It also acts as a barrier that prevents acids from the wood from discolouring your painting.
I like to coat both the back of my painting and the wooden block with the matte gel. This doubles the protection and ensures there are no air bubbles.
Then place your painting on to the wood. Use a brayer to press it down (the back of a tablespoon works too). Press the paper down evenly and check that the edges and corners are sticking properly.
![]()
Turn the painting face down onto a clean surface. Place a few large heavy books on top to press it down (try not to get distracted by reading the books, even if they're by Tommy Kane). Leave overnight to dry.
With a sharp craft knife, trim the painting along the edge of the cradle. I find if I keep the cut parallel to how I'm sitting, I get more control and the paper does not snag. If I try pulling the knife towards me, I'm more likely to end up with snags and wobbles. Cut flush to the wood so you don't end up with paper overlapping.
Sand the cradle and the edges of the paper to give an even finish. A 1500 grit paper or similar smooths everything off beautifully. I have also tried coarser grits to tame unruly edges and remove traces of gel from the cradle, then following up with the extra fine paper to get the smooth finish.
Attach D-rings and picture wire to the back of your cradle if you want to hang the finished piece. For extra protection, you can apply a layer of cold wax, such as Jacquard Dorland's cold wax. Use a soft cloth to put wax onto the painting and spread in circular motions, then buff with a clean cloth to achieve a smooth clear finish. The wax creates a layer which can be removed and replaced by art restorers without damaging the artwork. The varnish becomes a barrier layer, allowing this process to happen. You can also apply wax to the wooden cradle.
The watercolours shown are from my new Twilight Birds collection and are all mounted on wood. I've chosen sizes from 3" x 4" to 6" x 6", so they're perfect for standing in small spaces or sending as Christmas presents.
5 Comments
Natasha
23/10/2019 06:48:31 am
Thanks for sharing this process. It was very interesting and the way you described it made it easy to follow along. I will definitely try this out. Thanks again.
Reply
Andrea England
27/10/2019 09:42:31 am
Thank you so much Natasha! I'm glad you found this useful, and I'd love to hear how you get on!
Reply
Kathy
3/11/2019 06:04:09 am
Thank you for this process. I would love to give it a try. Do you have a source you can share to get the wood cradles as I have only been able to find 8x8 and larger?
Reply
Andrea
3/11/2019 06:48:46 am
My favourites come from Opus https://opusartsupplies.com/ Their Opus exhibition panels cost more than their Buzz panels, but are better quality. DeSerres have the widest range of sizes I've found so far https://www.deserres.ca/en/ If you're not in Canada, Dick Blick https://www.dickblick.com/ (US based) and Jacksons Art https://www.jacksonsart.com/en-ca/surface/boards-panels/wooden-panels (UK based) both have huge ranges and ship overseas.
Reply
Kathy
4/11/2019 07:18:20 am
Thank you so much for this info...look forward to trying this out. Leave a Reply. |
Andrea England
An Artist Afloat- Painting the world one anchorage at a time. Archives
August 2020
Categories
All
|